34 Kwhot Sale Chinese Stamford a. C. Sychronous Three Phase Brushless Alternator

34 KW Hot Sale Chinese Stamford A. C. Sychronous Three Phase Brushless Alternator





Features:

1.Any permanent magnetic generators, providing invariable excitation on all occasions.

2.Easy to be connected with power network or other generators. Standard 2/3 pitch windings check excessive midline current.

3.Balanced rotor with single ball bearing or  two sealed ball bearings

4.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts

5.Wide range of Flange adaptor and single bearing coupling disc

6. Meet leading Industry and Marine standards

Electrical Charcter:

Excitation Systerm

AS440,SX460,SA465,SX440,SX421,MX341 or MX321

The main stator provides power for excitation of the exciter field via AVR

Output power of exciter's rotor is input to that of mains through 3-phase full wave rectifier.Two ends of the rectifier are connected with piezoresistance for restraining surge voltage and avoiding the impact caused by short circuit or parallel synchronization loss. Exciter's Stator is equipped with permanent magnetic steel, it can make generator starting smoothly in any occasions.

Voltage regulation(1.0%) and low frequency protection, exterior voltage adjustment of SX440,MX341 and Mx321 suitable for the generator with permanent magnetic generator (PMG)

Frame:

All industrial standard generators is IP21(NEMA1), also IP23 is optional, But rated power will decrease 5%,

Marine standard generators is Ip23. Air filter is optional, but rated power will decrease 5% if installed.

Axis and Key

All of the generator rotors pass balance test, The vibrations are lower than the minium of BS6861 P.A,  G2.5 two bearing generator has a half-key testing balance.

Terminal and Terminal  Box

The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels

Engine Adaptor and Coupling Disc

SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available. 

SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available. 

Voltage Regulation:

Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR

Applications:It is suitable to match with any brands of the diesel engines in the world, such as USA brand, UK brand, Lovol,  Deutz,Volvo Penta,Kubota, Doosan and China made diesel engines. It can be used in land, watercraft, railway, hotel and the places need industry power. Our high-quality reliable AC generators are winning great acclaim from the domestic and abroad power generation market.








 

FAQ :

1. What's the delivery time,lead time?

Delivery within 25 days after deposit confirmed.
2. What's your payment terms?
1).We accept 30% T/T as the deposit,the balance payment  paid before delivery when see the copy of B/L.
2). L/C at sight.
4. What's your warranty & guaranty ?
Warranty is one year or 3000 hours which comes first. 
5. What's your MOQ?
MOQ  is 10 sets.
6. What's the frequency of diesel generators?
50Hz  & 60HZ .
7. What's the voltage of your diesel generator?
Voltage is 220/380V,230/400V,240/415V,110/220V,230/440V, just as per your request.
8.Q:Are you a factory or trading company?         A:  We are a famous  manufacturer named MINDONG MINSUN POWER,our engineers are from old MINDONG MOTOR factory .
  9. Q:Where is your factory located?           
     A: Our factory is in famous power city-FU'AN CITY,FUJIAN,near Taiwan.It is only 2 hours from Fuzhou airport by car;and 2.5 hours by     train from Xiamen Airport;6 hours from Shanghai Airport by train.
10 .Q:What is the material of your products?   
      A: We use AAA Grade Iron or Steel cast and 100% copper wire inside alternator.
 11.Q:How about quality control in your factory?      
A: MINDONG MINSUN POWER is a good reputiaon factory. We are always paying great attentions to quality controlling from the beginning to the end.We also have strict testing system and equipments for the all procedure of the production,and three engineers.
12. Can you supply spare parts?
A: Yes, we supply spare parts, if within the warranty, we can offer spare parts free.
13.Q: Is it all right to make customer's own brand name?
A: Yes,we can be your OEM manufacture with your authorization of     brand.
14.Q: What is your company's available production capacity?
A: 5000-10000 pieces  per month against your orders.
15.What is your main products and engine brands ,and power range?
A: Our main products are ---
1).Copy Stamford ,brushless alternator from the power 7.5 KVA to 2200 KVA .
2).ST,STC ,TZH carbon brush alternator from 2 KVA to 400 KVA.
3).We also have some famous brands of alternators for your options,such as original STAMFORD,LEROY SOMER,MECC,ENGGA,MARATHON etc. to match famous engines for gensets.

34 KW Hot Sale Chinese Stamford A. C. Sychronous Three Phase Brushless Alternator





Features:

1.Any permanent magnetic generators, providing invariable excitation on all occasions.

2.Easy to be connected with power network or other generators. Standard 2/3 pitch windings check excessive midline current.

3.Balanced rotor with single ball bearing or  two sealed ball bearings

4.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts

5.Wide range of Flange adaptor and single bearing coupling disc

6. Meet leading Industry and Marine standards

Electrical Charcter:

Excitation Systerm

AS440,SX460,SA465,SX440,SX421,MX341 or MX321

The main stator provides power for excitation of the exciter field via AVR

Output power of exciter's rotor is input to that of mains through 3-phase full wave rectifier.Two ends of the rectifier are connected with piezoresistance for restraining surge voltage and avoiding the impact caused by short circuit or parallel synchronization loss. Exciter's Stator is equipped with permanent magnetic steel, it can make generator starting smoothly in any occasions.

Voltage regulation(1.0%) and low frequency protection, exterior voltage adjustment of SX440,MX341 and Mx321 suitable for the generator with permanent magnetic generator (PMG)

Frame:

All industrial standard generators is IP21(NEMA1), also IP23 is optional, But rated power will decrease 5%,

Marine standard generators is Ip23. Air filter is optional, but rated power will decrease 5% if installed.

Axis and Key

All of the generator rotors pass balance test, The vibrations are lower than the minium of BS6861 P.A,  G2.5 two bearing generator has a half-key testing balance.

Terminal and Terminal  Box

The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels

Engine Adaptor and Coupling Disc

SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available. 

SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available. 

Voltage Regulation:

Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR

Applications:It is suitable to match with any brands of the diesel engines in the world, such as USA brand, UK brand, Lovol,  Deutz,Volvo Penta,Kubota, Doosan and China made diesel engines. It can be used in land, watercraft, railway, hotel and the places need industry power. Our high-quality reliable AC generators are winning great acclaim from the domestic and abroad power generation market.








 

FAQ :

1. What's the delivery time,lead time?

Delivery within 25 days after deposit confirmed.
2. What's your payment terms?
1).We accept 30% T/T as the deposit,the balance payment  paid before delivery when see the copy of B/L.
2). L/C at sight.
4. What's your warranty & guaranty ?
Warranty is one year or 3000 hours which comes first. 
5. What's your MOQ?
MOQ  is 10 sets.
6. What's the frequency of diesel generators?
50Hz  & 60HZ .
7. What's the voltage of your diesel generator?
Voltage is 220/380V,230/400V,240/415V,110/220V,230/440V, just as per your request.
8.Q:Are you a factory or trading company?         A:  We are a famous  manufacturer named MINDONG MINSUN POWER,our engineers are from old MINDONG MOTOR factory .
  9. Q:Where is your factory located?           
     A: Our factory is in famous power city-FU'AN CITY,FUJIAN,near Taiwan.It is only 2 hours from Fuzhou airport by car;and 2.5 hours by     train from Xiamen Airport;6 hours from Shanghai Airport by train.
10 .Q:What is the material of your products?   
      A: We use AAA Grade Iron or Steel cast and 100% copper wire inside alternator.
 11.Q:How about quality control in your factory?      
A: MINDONG MINSUN POWER is a good reputiaon factory. We are always paying great attentions to quality controlling from the beginning to the end.We also have strict testing system and equipments for the all procedure of the production,and three engineers.
12. Can you supply spare parts?
A: Yes, we supply spare parts, if within the warranty, we can offer spare parts free.
13.Q: Is it all right to make customer's own brand name?
A: Yes,we can be your OEM manufacture with your authorization of     brand.
14.Q: What is your company's available production capacity?
A: 5000-10000 pieces  per month against your orders.
15.What is your main products and engine brands ,and power range?
A: Our main products are ---
1).Copy Stamford ,brushless alternator from the power 7.5 KVA to 2200 KVA .
2).ST,STC ,TZH carbon brush alternator from 2 KVA to 400 KVA.
3).We also have some famous brands of alternators for your options,such as original STAMFORD,LEROY SOMER,MECC,ENGGA,MARATHON etc. to match famous engines for gensets.

Semi-Trailer axle is placed in the vehicle center of gravity (when vehicle uniform loading), and is equipped with the horizontal and vertical force can be passed to the tractor trailer hitch. Semi-trailer is generally three axle semi-trailer, and its types are divided into 11 m warehouse bar semi-trailer, 13 meters storehouse bar, low flat-panel semi-trailer and so on many kinds. By traction pin connected to hang half a head of a heavy transport vehicles.
Dump semi-trailer
Dump semi-trailer is applicable to coal, ore, building materials such as scattered bulk cargo transportation. Dump semi-trailer according to use can be divided into two broad categories: type belongs to the highway transportation of heavy and super-heavy tipping trailer mainly undertake large-scale mining, engineering tasks such as transportation, often and excavator. Another kind of highway transportation with light medium normal dump trailer mainly sandstone, clay, coal of bulk cargo transportation, which is equipped with loader. 1, use rear and side dump car, can effectively improve the efficiency of loading and unloading machine transportation scattered bulk cargo transport. 2, the frame and carriage longitudinal beam adopts high-quality manganese plate welding and become, a dustpan and rectangular box was two. Have high strength, strong lifting force, stiffness and toughness, good bearing capacity is strong, not permanent deformation. 3, sophisticated technology, main parts adopt advanced equipment and longitudinal beam has a fully automatic submerged arc welding, the assembly machine for accurate assembly of shaft and plate spring.
Low flat-panel semi-trailer
Low flat-panel semi-trailer vehicle parts no column board, wide range of USES, mainly used in long-haul freight transport. Series of semi-trailer frame girder structure for wear, longitudinal beam adopts flat type of gooseneck. Web height from 400 mm to 400 mm, longitudinal beam adopts automatic submerged arc welding welding, the frame adopts shot blast, beam through the longitudinal beam and the welding as a whole. Tandem dry plate spring and suspension bearing form, reasonable structure, strong rigidity and strength, is used to impact the bearing load. Low flat-panel semi-trailer is usually used to transport heavy vehicles (e.g., tractors, buses and special vehicles, etc.), rail vehicles, mining machine forestry machinery, agricultural machinery, such as excavators, bulldozers, loaders, paver, cranes, etc.) and other heavy goods, its center of gravity is lower, the better the stability and safety, transport overheight cargo and overhead obstacles by the stronger the ability. Low flat-panel semi-trailer structure and load plate semi-trailer usually adopt concave beam (or well type) frame, frame front for both gooseneck (goose segment anterior portion of traction pin connected to the tractor traction saddle, after the gooseneck end connected to the semi-trailer frame), the middle for the goods (frame the minimum section), the back-end for wheel (wheel). In low flat-panel semi-trailer loads on machinery and equipment, usually from semi-trailer back-end loading machinery and equipment, namely by moving from the rear shelf surface mechanical equipment or remove the wheel, then the mechanical device fixed on the semi-trailer. Flat plate semi-trailer walking structures, the use of high strength steel international vehicle weight is light, and to ensure its ability to resist distortion, seismic resistance, turbulence, meet different pavement bearing capacity.

CangShan type semi-trailer
CangShan type semi-trailer truck parts adopt the fence structure design of semi-trailer. It is mainly used for agricultural and sideline products and other light bubble is the transportation of the goods. 1, models and combining user goods category fence structure design process, the reasonable design, satisfy the load cases sufficient to reduce car weight, simple structure, convenient disassembly, for users reduce the investment cost, create more profit value. 2, the frame: the longitudinal beam and the whole throughout the beam compound and into a space frame structure. Can balanced frame strength, stiffness, toughness, carrying capacity is strong, not permanent deformation. 3, series CangShan type semi-trailer frame are all wear girder structure, the longitudinal beam adopts flat type or gooseneck. Web height from 400 to 500, longitudinal beam adopts automatic submerged arc welding welding, the frame adopts blasting treatment, beam through the longitudinal beam and the welding as a whole. 4, suspension system: a new type of suspension system, high strength, impact resistance is strong; Rod shaft axis load balance, system design, in the process of running frequent turbulence, reduce the friction and sliding distance tire and ground, effectively reduce the tire wear, adjustable lever at the same time, can adjust the wheelbase, effectively avoid partial running-in chew wheel tires phenomenon.
Container semi-trailer
Container semi-trailer semi-trailer container loading parts of structure. Is mainly used in ships, ports and routes, roads, hubs, Bridges, tunnels, multimodal transport logistics system matching. 1, dedicated to all kinds of container transportation. Can be long-term repeated use, have enough strength. 2, use container transport goods, can be directly on the shipper's warehouse loading and unloading, shipped to the consignee's warehouse midway replacement car, ship, the goods do not need to change from the inside out. 3, can undertake rapid loading and unloading, and can conveniently change directly from a transport to another transport. 4, to facilitate full and empty, meet the personalized needs of customers. According to the customer need to tooling to ensure, stable quality, reliable performance. Container semi-trailer is a special transport container transport trailer. Container transport development initial period, because of less container load, quantity is not big, use normal truck carrying. Since the 1960 s, with the rapid development of container transportation, countries have developed into a specialized shipping container car. The size of the container trailer loaded parts according to the standard container size, and in the position of the corresponding to the four corners at the bottom of the container is equipped with fixed container twist lock device. Special transport trailer carrying container. In the corners of loading station is equipped with fixed container twist lock device. Usually takes half hanging, hanging and double hung, with half a hanging. Half hanging type and plate type and framing, the former has a flat goods, also can be used to a common grew up cargo; The latter is not available, the container loaded on the chassis frame, by the twist lock device fixed as the strength of the semi artifacts.
Tank semi-trailer
Tank semi-trailer cargo semi-trailer parts structure for the tank structure. Mainly used to transport the liquid, bulk cargo and bulk cement, etc. 1 series is divided into a tanker, tank car, Concrete Mixer Truck, powder materials, Bulk Cement Truck, water supply and so on. 2, tanks through the 3 d design, advanced processing technology. Chassis of various manufacturers use special chassis, advanced technology, reliable in performance. Equipped with canned container truck. Advantages: high efficiency of loading and unloading transportation. Ensure the quality of goods. To transportation safety. Reduce labor intensity, improve the conditions of loading and unloading. Packaging material saving, save Labour. Reduce the transportation cost. Tank car: shipping fuel oil, lubricating oil, acid, alkali, water, food and beverage, etc. Powder tank car: shipment cement, flour, powder, etc. Tank car: shipment such as nitrogen, argon gas, liquefied petroleum gas (LPG), particle tank car: shipment of granular grains, beans, plastic and other granular materials. Other special tank car: concrete mixer truck, water sprayer, sweeper, etc. Tank car according to the working pressure of the container can be divided into: the low pressure tank (tank under internal pressure generally below 0.09 Mpa. The main water, light fuel oil, etc.) in medium pressure tanker, tank under internal pressure is commonly 0.147 0.294 Mpa. The main pack caustic, asphalt, etc.) high pressure tank (tank under internal pressure is commonly 1.177 3.532 Mpa).

Semi-Trailer

Semi-Trailer, Tank Semi Trailer,Dump Semi Trailer,Flat bed Semi Trailer,LPG Semi Trailer,Flammable Liquid Semi Trailer,Oil Tanker Semi Trailer

CLW GROUP TRUCK , http://www.clwgrouptruck.net