Xigong Chu Sheng Docking Garbage Truck Operation Method

Xigong Chusheng Docking Garbage Truck is a special vehicle used for garbage transfer and unloading in urban garbage compression stations. The box body of the vehicle adopts the high-quality carbon steel plate sealed and welded structure, which has the advantages of high strength, light weight, and no secondary pollution. The following is the method of operation of garbage collectors of Xiagong Chusheng.
Before loading the garbage, when the no-load operation reaches 6 standard air pressure, hang the power take-off device (bottom left of the steering wheel in the cab) and check whether there is any leakage or abnormality in each component, and then operate according to the position indicated by the operation signboard; The steps are as follows:

1. Docking garbage loading: push the rear door operating handle to the open position, and the wall cylinders on the left and right sides of the box are extended so that the rear door of the box is first pushed out horizontally for a certain distance, and is turned up and opened, releasing the operating handle to make it back To the median. After the rear door is opened, the garbage truck is docked with the compression box door, and the garbage is pushed horizontally into the carriage from the compression box. After the garbage is loaded, the garbage truck is released from the docking state and the rear door operation handle is pushed to the closed position. The cylinders on both sides of the wall are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return it to the neutral position.

Second, butt-type refuse dump: When the vehicle reaches 6 standard air pressures, the power take-off device is hung. After checking whether there are any leaks or abnormalities in each component, operate according to the position indicated by the operation signboard. Push the rear door operating handle to the open position, and the wallboard cylinders on the left and right sides of the box are extended, so that the rear door of the box is first pushed out horizontally for a certain distance and then turned up and opened; releasing the operating handle to the neutral position. Push the handle of the dumping operation to the raised position, the self-unloading cylinder extends, the garbage box body rotates around the turning shaft, the garbage box forms a dumping angle, the garbage is discharged from the box body, and the dumping operation handle is released to return it Median;

3. Xigong Gongchu Sheng docking garbage truck after unloading: push the dump handle to the drop position, the dump cylinder recovers, the garbage bin rotates around the turning axis, and the garbage bin is put back on the attached frame and released The dump handle returns to its neutral position. Push the rear door operating handle to the closed position, the wall cylinders on the left and right sides of the box are retracted, the rear door is turned downwards, and finally the rear door is horizontally pulled back tightly, releasing the operating handle to return to the neutral position. Loosen the power take-off bin and place it. The vehicle can be driven.

cone crusher

Crusher,Stone Crusher,Impact Crusher,Jaw Crusher

Yike Road & Bridge Machinery Co., Ltd. , http://www.shtoggleplate.com