Hot Melt Butyl Extruder Machine used to the seal aluminum spacer bar of insulating glass.We have automatic and semi-Automatic Butyl Extruder Machine which are used to seal the aluminum spacer as the first step seal.And hot melt butyl extruder machine used to extrude the hot melt as the only one seal for the insulating glass. Hot Melt Butyl Extruder Machine Automatic Hot Melt Butyl Extruder Machine,Hot Melt Butyl Sealant Glass Machine,Butyl Rubber Extruder Glass Machine,Manual Hot Melt Extruder Machine JINAN WEILI MACHINE CO LTD , https://www.weiliglassmachine.com
Features:Â
1. High efficiency and energy saving motor.
2. New heavy-duty sealed contact with silver-alloy contact pads, being long life and high quality.
3. Patent brake being more reliability and safety.
4. O-ring sealed, protecting motor from water and dust.
5. Aircraft grade wire rope, or synthetic rope is optional.
6. Remote switch & wireless remote control being alternative.
7. Our products are of well-designed, beautiful appearance and easy to install.
Specification:
Rated line pull:Â
12500Lbs (5670kgs) single line
Motor:
Series wound 6.5hp /4.8kw,12V DC
Gear Train:
3 stage planetary
Gear ratio:Â
273:Â 1
Clutch:
Sliding Ring gear
Braking action:
Automatic in the drum
Fairlead:
Roller fairlead for wire rope
Wire rope:
9.5mm×26m
Drum size:
2.5"×9.0"(64mm×228mm)
Dimensions:Â
23"×6.6"×8.7"( 584mm×168mm×220mm)
Mounting bolt pattern:
10"×4.5"(254mm×114.3mm)
Battery:
Recommended 650 CCA minimum for winching 25 square mm,72"(1.83m)
N.W:Â
93lbs (42kgs)
Packing:
680mmx360mmx260mm (324pcs per 20' container)
Line speed and motor current (first layer)
Line pull
Lbs
0
4000
6000
10000
12500
Kgs
0
1814
2722
4536
5670
Line speed
FPM
25.5
15
11.5
6.9
6
MPM
7.8
4.6
3.5
2
1.8
Motor current
Amps
80
150
180
290
350
Line pull and cable capacity
Â
Layer of cable
1
2
3
4
Â
Rated line pull per layer
Lbs
12500
10000
8600
7500
Â
Kgs
5670
4536
3629
3402
Â
Cable capacity per layer
Ft.
17.6
37
63
85
Â
M
5.4
11.4
19.4
26
Â
Shipping Service
We can arrange you transportation, we have our own shipping and express company, or we can use your forwarder.
 
How to choose a ZHME Winch for your vehicle
 Can't decide which winch is right for you? The best way to choose is to calculate the line pull needed for the application. To do this multiply your vehicle's Gross Vehicle Weight (GVW) by 1.5 - this will give an approximation for how big your winch should be. Typically, the first layer of rope around the drum is the max load the winch is capable of. Each additional layer deducts about 10% off the rated line pull. So for a winch rated 9,500lbs, the second layer will pull 8,550lbs, the third 7,700lbs, etc. A loss of pulling power can also be experienced when the rope isn't spooled evenly on the drum. So re-spool your winch before you go out!
 
Â