Top loading configuration  Fire Pump  The fire pump is the heart of the vehicle and it is done by both inhalation and output water. This car uses CB20 normal pressure fire pump equipment box  Six equipment rooms and rear equipment rooms on both sides of the equipment box are equipped with fire-fighting equipment as standard. And leave enough space for users to add fire-fighting equipment. The equipment boxes are installed with beautiful and practical aluminum alloy curtain doors. The pipeline water pump pipe is composed of a water inlet pipe, a water outlet pipe and a butterfly valve. Water intake pipe and backward from both sides of the inlet pipe water piping components. The side inlet line is used to pump natural water, and the rear inlet line is the water in the suction tank. When pumping natural water, connect the water-absorbing hose and the water filter to the left or right water pipe connector. Do not pump natural water, tightly cap tightly sealed. When pumping the water in the tank, open the inlet valve and the water will enter the pump. Second, the outlet pipe Outlet pipe routing side outlet pipe and water out of the pipeline and other components. The side outlet pipes route left and right outlet pipes, valves, tee pipes, pipe joints, and hoses, water guns, etc. The pressure water of the water pump passes through the side outlet pipe, and the outlet valve is connected with the hose to eject from the water gun. The water gun outflow pipe is composed of a three-way pipe, a soft connection flange, a valve and a water gun on the left outlet pipe. The pressure water of the water pump is connected to the water gun through the disc valve of the pipeline barrel and blows outward. Fire Monitor Fire cannon is an important tool for fire fighting vehicles at close range and with large flow of fire. It consists of a muzzle, a gun body, a rotating mechanism, a pitching mechanism, an operating mechanism and a gun seat. It is installed on the top of the tank and is directly connected to the water pump by the barrel outlet pipe. The water is controlled by the barrel valve. The water tanker's fire monitor is the PS20 type. Electrical device The electrical apparatus of the vehicle is modified based on the original vehicle electrical apparatus. The original ignition system, the engine and the starter's electrical equipment were not altered, but based on the use of the vehicle, additional lights, alarms, compartment lights, solenoid valves, and fire lighting were installed. The sirens input DC 12V voltage, and the horn loudspeaker can play sounds and speeches, and has the functions of alarm siring, short tone double tone, automatic shifting, manual shifting, and police car air whistle. Ningbo Yinzhou Leisheng Machinery Co.,Ltd , https://www.nblscasting.com
Dongfeng Furika 2.5-Aqueous Tank Fire Truck
Chassis configuration  Model: EQ1050NJ20D3 Furika double cab, Dongfeng 5-speed gearbox, 1.5 tons front axle, 3.5 tons rear axle, Dongfeng 5-speed change 7.00-16 nylon tire, 188 girder. There are two kinds of engines available: First, Chaochai 95 horsepower direct injection, and second, Yuchai 90's EFI engine.