Sodium Lauryl Ether Sulfate (SLES),white or yellowish paste, an anionic Detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste, etc.). SLES is an inexpensive and very effective foaming agent.SLES, sodium lauryl sulfate (SLS), ammonium lauryl sulfate (ALS), and sodium pareth sulfate are surfactants that are used in many cosmetic products for their cleaning and emulsifying properties. They behave similarly to soap. It is derived from palm kernel oil or coconut oil.
Its chemical formula is CH3(CH2)11(OCH2CH2)nOSO3Na. Sometimes the number represented by n is specified in the name, for example laureth-2 sulfate. The product is heterogeneous in the number of ethoxyl groups, where n is the mean. Laureth-3 sulfate is common in commercial products.
SLES is prepared by ethoxylation of dodecyl alcohol, which is produced industrially from palm kernel oil or coconut oil. The resulting ethoxylate is converted to a half ester of sulfuric ACID, which is neutralized by conversion to the sodium salt.[1] The related surfactant sodium lauryl sulfate (also known as sodium dodecyl sulfate or SDS) is produced similarly, but without the ethoxylation step. SLS and ammonium lauryl sulfate (ALS) are commonly used alternatives to SLES in consumer products.
SLES is a kind of anionic surfactant with excellent performance.
It has good cleaning, emulsifying, wetting, densifying and foaming performance,with good solvency, wide compatibility, strong resistance to hard water, high biodegradation, and low irritation to skin and eye.
1.SLES(Sodium Laureth Sulphate) widely used in liquid detergent.; e.g. Shampoo, dishwashing detergent, bubble bath liquid, hand washing etc.
2.If using SLES(Sodium Lauryl Ether Sulfate) to replace LABSA partially, phosphate can be saved or reduced, and general dosage of active matter may be reduced, in washing powder and detergent for heavy dirty.
3.SLES(Sodium Lauryl Ether Sulphate) can be used as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.; e.g. printing and dyeing industry, petroleum and leather industry.
Lauryl Ether Sulfate,Sodium Lauryl Ether Sulfate,Sodium Laureth Ether Sulfate,Sodium Lauryl Ether Sulfate Detergent HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com
ITEM VALUES REMARKS
Working
Performance
Parameters Max. Rated total load 30000kg
Max. Lifting moment of fully extended main Boom 1132kN. M
Max. Lifting height of basic Boom 11.1m
Max. Lifting moment of fully extended main Boom 588kN. M
Max. Lifting height of main Boom 40.5m
Working speed Max. Single rope speed(main winch) 120m/min
Max. Single rope speed(auxilliary winch) 120m/min
Boom elevation time 40s
Boom extending rime 80s
Swivelling speed 0-2.2r/min
Travel parameters Max. Travel speed 78km/h
Max. Gradeability 37%
Min. Turning diameter <=22m
Min. Ground clearance 220mm
Fuel consuption per 100km 35L
Weight parameters Dead weight under traveling condition(total mass) 32000kg
Whole vehicle curb weight 31870kg
Front shaft load 7000kg
Rear axle load 25000kg
Dimension Overall dimension 12900x2500x3465mm
Outrigger longitudinal span 5.36m
Outrigger transverse span Fully extended 6.1m, semi-extended 4.2m
Rear and swing radius 3385mm
Main Boom length 10.6-40m
Main Boom elevation angle -2 - 80 degree
Fly jib length 8m
Jib set angle 0.30 degree
Item
Value
Remarks
Working performance specification
Max. rated total lifting capacitykg
32000Â
Max. load moment of basic boomkN.m
1132Â
Max. load moment with max. main boom lengthkN.m
588Â
Max. lifting height of basic boomm
11.1Â
Max. lifting height of main boomm
40.5
Deformation of boom is not taken into consideration.
Max. lifting height of fly jibm
48.5
Working speed
Max. speed of single rope on main winch m/min
120
The 4 th  layer of drum
Max. speed of single rope onauxiliary winch m/min
100
The 2 nd  layer of drum
Derricking time of booms
40Â
Telescopic time of booms
80Â
Slewing speedr/min
0~2.2Â
Traveling specification
Max. traveling speedkm/h
78Â
Max. gradeability%
37Â
Min. turning circle diameter m
22Â
Min. ground clearancemm
220Â
Limits for exhaust pollutants and smoke
Comply with related standards
GB3847-2005
GB17691-2005 (StageIII)
Oil consumption per hundred kilometersL
45Â
Mass specification
Deadweight of crane in traveling conditionkg
32000Â
Complete vehicle kerb mass kg
31870Â
Front axle loadkg
7000Â
Rear axle loadkg
25000Â
Dimension specification
Overall dimensions (L×W×H)mm
12900×2500×3465Â
Base on outriggersm
5.36Â
Distance between outriggersm
6.1Â
Main boom lengthm
10.6~40.0Â
Main boom angle°
-2~80Â
Fly jib lengthm
8Â
Offset angle of fly jib°
0 , 30Â
Chassis
Model
ZLJ5323
Feature No:ZLJ5323V3.2
ZLJ5323V3.3T
Class
IIÂ
Engine
Model
WP10.270
QSC 260
Rated powerkW/r/min
199/2200
194/2200
Max. output torqueN.m/r/min
1100/1300~1600
1180/1500
ITEM VALUES REMARKS
Working
Performance
Parameters Max. Rated total load 30000kg
Max. Lifting moment of fully extended main Boom 1132kN. M
Max. Lifting height of basic Boom 11.1m
Max. Lifting moment of fully extended main Boom 588kN. M
Max. Lifting height of main Boom 40.5m
Working speed Max. Single rope speed(main winch) 120m/min
Max. Single rope speed(auxilliary winch) 120m/min
Boom elevation time 40s
Boom extending rime 80s
Swivelling speed 0-2.2r/min
Travel parameters Max. Travel speed 78km/h
Max. Gradeability 37%
Min. Turning diameter <=22m
Min. Ground clearance 220mm
Fuel consuption per 100km 35L
Weight parameters Dead weight under traveling condition(total mass) 32000kg
Whole vehicle curb weight 31870kg
Front shaft load 7000kg
Rear axle load 25000kg
Dimension Overall dimension 12900x2500x3465mm
Outrigger longitudinal span 5.36m
Outrigger transverse span Fully extended 6.1m, semi-extended 4.2m
Rear and swing radius 3385mm
Main Boom length 10.6-40m
Main Boom elevation angle -2 - 80 degree
Fly jib length 8m
Jib set angle 0.30 degree
Item
Value
Remarks
Working performance specification
Max. rated total lifting capacitykg
32000Â
Max. load moment of basic boomkN.m
1132Â
Max. load moment with max. main boom lengthkN.m
588Â
Max. lifting height of basic boomm
11.1Â
Max. lifting height of main boomm
40.5
Deformation of boom is not taken into consideration.
Max. lifting height of fly jibm
48.5
Working speed
Max. speed of single rope on main winch m/min
120
The 4 th  layer of drum
Max. speed of single rope onauxiliary winch m/min
100
The 2 nd  layer of drum
Derricking time of booms
40Â
Telescopic time of booms
80Â
Slewing speedr/min
0~2.2Â
Traveling specification
Max. traveling speedkm/h
78Â
Max. gradeability%
37Â
Min. turning circle diameter m
22Â
Min. ground clearancemm
220Â
Limits for exhaust pollutants and smoke
Comply with related standards
GB3847-2005
GB17691-2005 (StageIII)
Oil consumption per hundred kilometersL
45Â
Mass specification
Deadweight of crane in traveling conditionkg
32000Â
Complete vehicle kerb mass kg
31870Â
Front axle loadkg
7000Â
Rear axle loadkg
25000Â
Dimension specification
Overall dimensions (L×W×H)mm
12900×2500×3465Â
Base on outriggersm
5.36Â
Distance between outriggersm
6.1Â
Main boom lengthm
10.6~40.0Â
Main boom angle°
-2~80Â
Fly jib lengthm
8Â
Offset angle of fly jib°
0 , 30Â
Chassis
Model
ZLJ5323
Feature No:ZLJ5323V3.2
ZLJ5323V3.3T
Class
IIÂ
Engine
Model
WP10.270
QSC 260
Rated powerkW/r/min
199/2200
194/2200
Max. output torqueN.m/r/min
1100/1300~1600
1180/1500
China Famous Brand Zoomlion 30ton Crane Truck
Model NO.: QY30V532
Driving Type: 6X4
Air Conditioner: Optional
Application: Construction Usage
Tower Crane Type: Under Slewing Cranes
Sling Type: Wire Rope
Main Girder Form: Double Girder
Power Source: Hydraulic
Moving Type: Wheel
Installation: Assembled
Trademark: Zoomlion
Transport Package: Nude Packing
Origin: China
HS Code: 8706004000
Model NO.: QY30V532
Driving Type: 6X4
Air Conditioner: Optional
Application: Construction Usage
Tower Crane Type: Under Slewing Cranes
Sling Type: Wire Rope
Main Girder Form: Double Girder
Power Source: Hydraulic
Moving Type: Wheel
Installation: Assembled
Trademark: Zoomlion
Transport Package: Nude Packing
Origin: China
HS Code: 8706004000
Zoomlion 30ton Crane Truck