1 Subject content This standard stipulates the working capacity, responsibility, authority and operating procedures of the thick machine. 2. area This standard is applicable to the operator of the thick machine and the inspection and assessment of it. 3 job ability requirements 3.1 Passed the training of the post and the third-level safety education. 3.2 Have a junior high school education or above. 3.3 Familiar with the working principle of the equipment operated by this post and its safe operation procedures. 3.4 Have certain equipment operation experience or special training to obtain the corresponding grade certificate. 3.5 Familiar with the various process indicators. 4 Responsibility 4.1 Responsible for its own safety. 4.2 Responsible for the safety supervision of non-employees who enter this position. 4.3 Responsible for the safe operation of electromechanical equipment in this position. 4.4 Responsible for the fastening, lubrication and maintenance of the equipment. 4.5 Ensure the normal operation of the thickener and eliminate the pressure. 4.6 Ensure that the thickener overflows clear. 4.7 Ensure that the flocculant is added properly. 4.6 Responsible for the cleaning of this position. 5 permissions 5.1 The right to prevent non-employee staff from entering the work area. 5.2 The right to prevent employees who are not wearing protective products from entering the work area. 5.3 Have the right to prevent illegal command and illegal operation. 6 indicator requirements 6.1 Ensure that the tailings concentration is above ≥45, the concentrate concentration is ≥45, and the overflow water is clear and not crushed. 7.1  Dangerous source of this position 7.1.1 There is an up-and-down operation in the work area, and the operator does not wear a helmet or a helmet is not standardized. 7.1.2 There are high-level operations in the job area, and the thick machine is open. 7.1.3 There is more oil on the working platform of the thicker machine, and there is no timely cleaning and potential slipping accident. 7.2 Safety precautions and control measures 7.2.1 Carefully observe the surrounding environment and pay attention to lifting heavy objects. 7.2.2 Wear labor protection articles in strict accordance with the requirements, standardize wearing safety helmets, and beware of all kinds of bruises. 7.2.3 Regularly check the integrity of the protective railings and their stairways, and beware of falling down and falling from high places. 7.2.4 The oil quality on the working platform should be cleaned up in time to keep the workplace clean and tidy, and beware of slipping accidents. 7.2.5 Take precautions against dust hazards and wear masks during work. 7.2.6 Attention and careful inspection of the integrity of various power lines at all times, beware of electric shocks. 7.2.7 Check the thickener load at any time during the shift 7.2.8 Strengthen business learning, put an end to unsafe behaviors, operate strictly in accordance with operational procedures, and adhere to regularity to achieve standardized operations. 7.3 Environmental factors of this post 7.3.1 There is dust in the production process. 7.3.2 Pipe wear slurry, industrial wastewater leakage. 7.3.3 Equipment leakage. 7.3.4 Harmful waste generated by the impurity removal process. 7.3.5 Waste materials are not cleaned up in time. 7.3.6 Equipment and environmental sanitation are not cleaned. 7.4 Environmental Considerations and Control Measures 7.4.1 Take precautions against dust hazards and wear dust masks during work. 7.4.2 Repair worn pipelines, timely clean up the discharged slurry, concentrate the wastewater, and recycle. 7.4.3 Repair the leaking equipment and clean the leaked oil in time. 7.4.4 Clean up harmful slag in time. 7.4.5 Clean up waste materials in time, and classify and concentrate them. 7.4.6 Do a good job in equipment and environmental sanitation. 8.5 Operating procedures 8.5.1 Check before driving: a. Whether the screws of each part are loose, whether the overload device is in the normal position, and whether the lifting device is flexible. b. Whether the pipeline is unblocked, the valve is normal, and there is no jam in the transmission part. c. The hydraulic cylinder has no oil leakage, the hydraulic rod is not bent, and the hydraulic pipeline is not damaged. d. There is no foreign matter in the pool, and the control system such as hydraulic motor and valve has no oil leakage. 8.5.2 Driving sequence: a. After the inspection is completed, contact with the upper and lower linkage process to drive. b. The truss is slowly dropped to the specified position and then fed. c. Lift the load with the load, lift the car, start the motor, and lower the tweezers to the specified height. 8.5.3 In operation: a. The concentration of the ore should be controlled at 45±2%. Do not run over the overflow. b. Always check the transmission parts for abnormal noise, motor and bearing temperature are normal, and find problems in time. c. Regularly refuel as required to ensure adequate lubrication. d. Always check the condition of the overload pointer. When the critical value is approached, immediately lift the dice and remove it. 8.5.4 Parking sequence and precautions: a. When parking is only possible, stop the ore supply first, increase the discharge, and stop the concentrated main object after emptying, and lift the dice. b. When there is no notice of power failure or accidental stop, press the stop button immediately and lift the truss quickly. c. Generally, it is not allowed to stop after operation. When it is necessary to stop in special circumstances, the truss should be lifted quickly and the amount of ore should be increased to avoid burying the raft. This type of parking generally does not exceed one hour. d. When the electrical equipment fails, immediately cut off the power supply, quickly lift the dice and notify the electrician to repair. 8.5.5 Do the following lubrication work for the equipment in this position: 40Cm Width Pvc Wall Panels,Wide Wainscoting,Wide Board Wainscoting,Pvc Fireproof Wall Panel Puyang Shangyi Decoration Material Co., Ltd. , https://www.pysydecoration.com