Equipment equipment vehicle-Isuzu equipment equipment rescue vehicle_fire equipment equipment vehicle manufacturer The Isuzu logistics ambulance support vehicle is modified with Chongqing Isuzu Class II chassis and 600P single-row cab. The whole vehicle is equipped with multiple mobile rack modules, which can quickly remove the racks and empty the cargo compartment for the transportation of other materials. The main configuration of the vehicle is: mobile shelf module, vehicle support leg, folding step, equipment cabinet, light alarm system, reversing monitoring and radar, exterior lighting system, interior lighting system, etc. Rolling shutters are installed on the left and right and rear of the body to facilitate quick access to equipment; it can meet the storage and transportation of emergency equipment such as medical equipment, equipment, clothing, etc., and can adapt to ordinary roads, gravel roads, simple roads and special off-road environments with high reliability. . 1. The vehicle has strong mobility, high reliability, and good environmental adaptability; 2. It can meet the storage and transportation of emergency equipment such as medical equipment, materials, equipment, clothing, etc.; 3. The car body is made of international military watch Steel Plate structure technology, which is firm and reliable; 4. The whole vehicle has regional characteristics that adapt to the central and western regions, and its use is limited. The height is not less than 350mm; 5. Optional hydraulic tail plate at the rear, which is convenient for tool carts or personnel to get on and off during emergency handling. Equipment and equipment vehicle manufacturers call Minister Yin the same number on WeChat Isuzu equipment vehicle manufacturer's telephone number is the same as Minister Yin's WeChat number Vehicle parameters of Isuzu equipped vehicles Total mass 8280 (Kg) Volume: Rated load weight 1835 (Kg) Curb weight 6250 (Kg) Dimensions 7150, 6950 × 2550, 2500 × 3400, 3200 (mm) Cargo compartment size × × (mm) Rated passenger capacity (person) Total mass of quasi-trailer (kg) Cab: Front passenger: 3 (persons) Anti-lock brake system: Loaded mass utilization factor Fuel type: Diesel emission standard: GB3847-2005, GB17691-2018 National VI Approach angle/departure angle: 23/12,23/13(°) Front suspension/rear suspension: 1120/2215,1120/2015(mm) Number of axles: 2 Wheelbase: 3815 (mm) Number of tires: 6 tire size: 7.50R16LT 14PR Front track (mm): 1640, 1690 Rear track (mm): 1655 Axle load: 3000/5280 Speed: 105 (km/h) Equipment equipment vehicle-Isuzu equipment equipment rescue vehicle_fire equipment equipment vehicle manufacturer The ambulance support vehicle is a model developed by our company for emergency rescue and rescue. It has the following product advantages: 1. This model is designed by our company on the basis of digesting and absorbing foreign technology. 2. Realized functions: AC220V power generation and power supply, inverter power supply, lighting, hydraulic power source, emergency rescue and other main functions. 3. The car body adopts a rolling door structure, and the design of the pick-and-place equipment is quick and convenient. 4. The height of the whole vehicle can be customized according to the needs, and it can be unimpeded to the community with restricted height and quickly reach the rescue site. 5. The equipment cabinet adopts German imported aluminum alloy profiles, which can be adjusted and installed according to the size of the equipment. The equipment on both sides is fixed in different designs according to the structure of various vehicle-mounted equipment, and all equipment has lock fixing devices. 6. The equipped folding lighting system can provide lighting for on-site rescue and rescue all-weather 7. The configured generator set can provide AC220V power supply for on-board equipment. 8. Controllable lighting system: The roof lift lamp has the functions of high and low lift, horizontal rotation of 350° and vertical rotation of 180°, which is convenient for lighting the surrounding environment of the field construction site. 9. The configured hydraulic power station can provide a convenient and reliable power source for various hand-held hydraulic tools, with high efficiency, portable and mobile, strong power, and low operating cost Equipment equipment vehicle-Isuzu equipment equipment rescue vehicle_fire equipment equipment vehicle manufacturer Equipment and equipment vehicle manufacturers call Minister Yin Wechat Tonglian
Continuous casting slabs or primary rolling slabs are used as raw materials, heated by a stepping furnace, and dephosphorized by high-pressure water, and then enter the roughing mill. The rough rolling material is cut through the head, tail, and then into the finishing mill, and computer-controlled rolling is carried out. After the final rolling, it will go through laminar cooling (computer-controlled cooling rate) and take-up by the coiler to become a straight hair coil. The head and tail of straight hair curls tend to be tongue-shaped and fish-tailed, with poor thickness and width accuracy, and often have wavy, folded, tower-shaped and other defects on the edges. The coil is heavier and the inner diameter of the steel coil is 760mm. (Generally used in the pipe-making industry.) After straightening the hair through the cutting head, tail cutting, trimming and multi-pass straightening and smoothing finishing lines, and then cutting or re-rolling, it becomes: hot rolling steel plates, flat hot rolled steel coils, slitting tapes and other products. If the hot-rolled finishing coil is pickled to remove scale and coated with oil, it will become a hot-rolled pickled coil.
HRC Steel Coil,Cold Rolled Steel Coil,Hot Rolled Steel Coil,Hot Rolled Steel Coils Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
