Med-L-Yqx-I/II Anaerobic Incubator Lab Incubator

Posted on

Model NO.: MED-L-YQX-I/II
Range of Temperature-Control in Incubati: Rt+3~60degree
Temperature Fluctuation in Incubation CH: Plus or Minus 0.3 Degree
Temperature Balance in Incubation Chambe: Plus or Minus 1 Degree
Internal Dimension of Incubation Chamber: 30*19*29
Dimension of Operation Chamber(Cm): 80*65*65
Trademark: Med Equipment
Origin: Guangzhou China
Model NO.: MED-L-YQX-I/II
Range of Temperature-Control in Incubati: Rt+3~60degree
Temperature Fluctuation in Incubation CH: Plus or Minus 0.3 Degree
Temperature Balance in Incubation Chambe: Plus or Minus 1 Degree
Internal Dimension of Incubation Chamber: 30*19*29
Dimension of Operation Chamber(Cm): 80*65*65
Trademark: Med Equipment
Origin: Guangzhou China
Product Name: L-YQX-I/II Anaerobic incubator

 
ApplicationRange:
This type of product is in the bacterial culture under anaerobic conditions and operating. This device can nurture the growth of anaerobic organisms most difficult. Anaerobic organisms can avoid the risk of death that anaerobic organisms are exposed to oxygen.
Structural Characteristics:
The equipment is composed of the incubation chamber, operating chamber, sampling chamber, pneumatics system, bottle rack, melting wax sterilize and etc.
MainFeatures:
1. Microcomputer intelligent temperature controlling and overheating protection system.
2. UV disinfection light to avoid pollution.
3. Gas flow adjusted by pneumatics system.
4. Stainless steel operation room chamber. Thick, transparent and impact resistant glass window. Operations should be with gloves.
5. Special vaccination sticks sterilizer, cuvette rack and oxygen removing catalyst converter inside.
YQX-IIFeatures:
1.Big LCD screen controller.
2.Touch switch for gas path control.
Technical Parameter Table:
 
 
Model YQX-I/II/ T
Time for creating anaerobic state in sample chamber <5min
Time for creating anaerobic state in operation chamber <1hour
Time for maintaining anaerobic circumstances in the case of the operating room to stop additional trace gas mixture,>12 hours
Range of temperature-control in incubation chamber RT+3ºC~60ºC
Temperature fluctuation in incubation chamber ±0.3ºC
Temperature balance in incubation chamber ±1ºC
Power Rate 220V,50HZ/600W
Net/Gross weight(kg) 240/320
Internal Dimension of Incubation Chamber(cm) 30×19×29
Dimension of Operation Chamber(cm) 80×65×65
Overall Dimension(cm) 126×73×138
Package Size(cm) 139×92×156
 
Product Name: L-YQX-I/II Anaerobic incubator

 
ApplicationRange:
This type of product is in the bacterial culture under anaerobic conditions and operating. This device can nurture the growth of anaerobic organisms most difficult. Anaerobic organisms can avoid the risk of death that anaerobic organisms are exposed to oxygen.
Structural Characteristics:
The equipment is composed of the incubation chamber, operating chamber, sampling chamber, pneumatics system, bottle rack, melting wax sterilize and etc.
MainFeatures:
1. Microcomputer intelligent temperature controlling and overheating protection system.
2. UV disinfection light to avoid pollution.
3. Gas flow adjusted by pneumatics system.
4. Stainless steel operation room chamber. Thick, transparent and impact resistant glass window. Operations should be with gloves.
5. Special vaccination sticks sterilizer, cuvette rack and oxygen removing catalyst converter inside.
YQX-IIFeatures:
1.Big LCD screen controller.
2.Touch switch for gas path control.
Technical Parameter Table:
 
 
Model YQX-I/II/ T
Time for creating anaerobic state in sample chamber <5min
Time for creating anaerobic state in operation chamber <1hour
Time for maintaining anaerobic circumstances in the case of the operating room to stop additional trace gas mixture,>12 hours
Range of temperature-control in incubation chamber RT+3ºC~60ºC
Temperature fluctuation in incubation chamber ±0.3ºC
Temperature balance in incubation chamber ±1ºC
Power Rate 220V,50HZ/600W
Net/Gross weight(kg) 240/320
Internal Dimension of Incubation Chamber(cm) 30×19×29
Dimension of Operation Chamber(cm) 80×65×65
Overall Dimension(cm) 126×73×138
Package Size(cm) 139×92×156
 

SME Metal Pump Parts are made of high chrome white iron, grey cast iron or stainless steel. Especially the wet-end parts,

which are made of various chrome alloys to suit different slurry applications.


Features

1. Scientific design based on hydraulic theories;

2. Strict manufacturing procedures and professional QC personnel;
3. Various materials for different applications;
4. Long service life



Materials: A05, A33, A49, G01, G02, C21, C23, J04, J05

pump parts Warman 

Metal Pump Parts

Metal Pump Parts,A05 Slurry Pump Parts,A49 Pump Parts,Abrasion Resistant Pump Parts

Shijiazhuang Minerals Equipment Co., Ltd , http://www.smepump.com