Vacuum Angle Valve with Highly Chemical Resistant Manual Coating PTFE Teflon Coating

Posted on

  • Operating Range: 1×10⁻⁷ Pa to 1.2×10⁵ Pa
  • Cycles Until First Service: 200,000 Times
  • Transport Package: Carton
  • Origin: China
  • Leak Rate: 1.3×10⁻⁷ Pa·L/s
  • Trademark: CBVAC
  • Specification: Stainless Steel / Aluminum
  • HS Code: 8481804090
Vacuum Angle Valve with Highly Chemical Resistant Manual Coating PTFE Teflon Coating

Vacuum Angle Valve with Highly Chemical Resistant Manual Coating PTFE Teflon Coating
  1. Brief Introduction
This series of valves is suitable for the start and stop operations in ultra-high vacuum systems. They are two types of vacuum block valves—manual and pneumatic. These valves offer numerous advantages such as stability, durability, excellent sealing performance, and long service life. As a result, they are often the preferred choice in ultra-high vacuum equipment. The manual valves use a rotating handle for operation, while the pneumatic ones rely on compressed air. In case of power failure, the valve plates will automatically close due to spring force. The applicable media include pure air and non-corrosive gases.
  1. Features
  1. Designed in a standard and modular way, making it easy to replace and maintain.
  2. Easy to clean and maintain.
  3. Equipped with stainless steel bellows and Viton O-rings, no lubrication required.
  4. The inner body of the valve is welded using stainless steel, resulting in a low leak rate.
  1. Order Information
Each product has specific order numbers. Customers can search for these numbers based on the valve's operating mode and DN (Diameter Nominal).
Example: 2089
High Vacuum Manual Block Straight Valves, DN=16mm, CF Flange
DN (mm) Order No. Weight (kg)
Manual Pneumatic Manual Pneumatic
16 2089 2297 0.50 0.70
25 2090 2298 1.80 1.70
40 2091 2299 2.20 2.10
50 2092 2300 2.70 3.55
  1. Major Capacity Targets
  1. Application range: 1×10⁻⁶ Pa to 1.2×10⁵ Pa
  2. Differential pressure before opening valve plates: ≤1.2×10⁵ Pa in any direction
  3. Leak rate of valve body and base: < 1.3×10⁻⁷ Pa·L/s
  4. Cycling numbers before initial repair: 200,000 times
  5. Baking temperature of valve bodies: Open ≤200°C; Close ≤150°C
  6. Installation position: Any direction
  7. Power supply: AC 220V 50Hz, 6W or DC 24V, 3W (Cycles until first service)
  8. Compressed air (only for pneumatic valves): 0.4~0.7 MPa
  9. Speed of closing and opening (only for pneumatic valves): ≤1s
  10. Valve position indication
- Manual valves: with indication of start and stop positions
- Pneumatic valves: with indication of start and stop positions (magnet switch)
  1. Valve weight: Refer to the above table.
  1. External Dimensions
  1. Manual
Model DN Connecting flange Manual
A B C D E F G
CD-J16B 16 CF16 106 16 40 48 64 40 28
CD-J25B 25 CF25 137 25 55 69 89.5 50 40
CD-J40B 40 CF35 153 35 63 69 97.5 63 40
CD-J50B 50 CF50 192 50 80 92 126 63 40
 Pneumatic 
 
Model		 DN Connecting flange Pneumatic
A B C D E F G
CDQ-J16B 16 CF16 125 16 40 48 85 113 28
CDQ-J25B 25 CF25 149 25 55 69 111 140 40
CDQ-J40B 40 CF35 167 35 63 69 118 150 40
CDQ-J50B 50 CF50 207 50 80 92 144 210 50
CF flanges comply with GB/T 6071-2003
Optional Parts: Magnet Switch.

We can OEM and ODM as per your drawing and requirements
Vacuum Angle Valve with Highly Chemical Resistant Manual Coating PTFE Teflon Coating

Metallurgical Industry

Heat Exchanger,Support Roll,Metallurgical Industry,Radiant Tube Heaters For Sale

Tuopu Industry(Jiangsu) Co., Ltd. , https://www.tuopu-industry.com