The tungsten ore beneficiation production line is a production line for the ore dressing and purification of tungsten ore. The configuration of the tungsten ore beneficiation production line is mainly determined by the nature of the tungsten ore. Under normal circumstances, the tungsten ore can be divided into scheelite and black tungsten ore. There are certain differences, so the tungsten ore beneficiation production line is also divided into different types. The scheelite ore dressing production line is mainly a flotation production line. The black tungsten ore beneficiation production line is mainly a re-election line, but due to the different ore properties, for coarse-grained inlays. The sulphur ore beneficiation and re-election production line are also completely feasible. Below we will take a look at the beneficiation production process of scheelite and wolframite for reference by relevant parties! 1. White tungsten ore dressing process The scheelite is naturally floatable, mostly fine-grained, and the content is low. Therefore, the most commonly used scheelite ore dressing production line is a flotation production line, which recovers white tungsten from low-grade scheelite to achieve the purpose of beneficiation and purification. The scheelite flotation production line is mainly composed of crusher , ball mill , classifier, mixing tank, flotation machine, concentrator, filter press and other equipment. The ore dressing process is complex, the equipment investment is huge, and the production cost is also high, but the ore dressing The indicator is better. The scheelite re-election line is a beneficiation production line designed for the coarse-grained scheelite. It has a poor effect on fine-grained scheelite. The re-election of scheelite mainly consists of crusher and vibration. Screening, rod mill, jig, dewatering screen, etc. The re-election line is sorted according to the difference in specific gravity between scheelite and gangue. It has simple beneficiation process, low equipment investment, low production cost and beneficiation efficiency. Higher characteristics, but its ore dressing index is lower than the flotation production line. 2. Black tungsten ore beneficiation process The ore dressing of the black tungsten ore is mainly based on re-election. Since the black tungsten ore has a certain magnetic permeability, there are cases in which the black-tungsten ore is recovered by strong magnetic separation, but the most important method is the re-election method. The black tungsten ore beneficiation production line mainly consists of crusher, rod mill, jig, dewatering screen, etc. It is also gravity sorting based on the difference in specific gravity between the black tungsten ore and the gangue, due to the scheelite and the wolframite. Crystals are characterized by brittleness and brittleness. Therefore, it is recommended that the crushing process use crushing equipment with less pulverization, such as rod mills and roller crushers. XTQM series hydraulic truck dumper is truck bulk material unloading device that integrates electric and hydraulic control, and is widely used for bulk materials like grain, forage, cement and coke. The equipment improves production efficiency, saves unloading cost, and creates good economic benefit for the user. Movable Truck Unloading Platform Movable Truck Unloading Platform, Movable Truck Tipper, Movable Truck Unloader,Truck Unloading Platform SHANDONG JINZHONG SCIENCE & TECHNOLOGY GROUP COMPANY LIMITED , https://www.chinagoldbell.com