30kVA Cummins Power Generator Diesel Generators

Product Description
1. Engine
Heavy duty diesel engine
Four stroke, water cooled
24V stater and charge alternator
Cooling radiator and fan
Maintenance free battery including ract and cable
Flexible fuel connection hoses and manual oil sump drain valve
Exhaust silencer
2. Alternator
Brushless, single bearing, flexible disc
Insulation class: H
Protection class: IP23
Self-exciting and Self-regulation
3. Soundproof Canopy
All canopy designed with modular principles
All metal canopy parts painted by electrostatic polyester power paint
Soundproof design ensure that the noise level be controlled in small scope
Convenient to lift and move
Easy to maintenance and operate
4. Fuel Tank
Base frame including position for forklift and crane
Integral fuel tank
Daily fuel tank continuously supply for 8-24 hours
Fuel tank easy to maintain and clean
Anti-vibration pads are flexed between engine and alternator.
5. Control Panel
Smartgen 6110, function including:High water temperature, Low oil pressure, Over and under speed,
Over current, Under/Over generator voltage, Start and stop failure, Low and high battery voltage,
Charge fail, Emergency stop.






Technical Parameter 
30kVA Diesel Generators Soundprood Type Powed by Cummins

Environmental conditions: Altitude: ≤1000 m  Ambient temperature: 40 ºC, Relative humidity: ≤60%
Max Power: 24KW/30KVA			Steady State Voltage Regulation Rate: ≤±0.5%
Prime Power: 20KW/25KVA			Voltage Fluctuation Rate: ≤±0.5%
Phase: ThreeÂ			Transient Voltage Regulation Rate: +20~-20%
Power Factor: COSΦ=0.8			Voltage Stable Time: ≤1S
Output Voltage: 380/220 V			Steady State Frequency Regulation Rate: ≤1%
Output Current: 43.2 A			Frequency Fluctuation Rate: ≤±0.5%
Rated Frequency: 50 HZ			Transient frequency regulation rate: +15~-10%
Rated Speed: 1500 RPM			Frequency Stable Time: ≤3S
Size(L×W×H): 2200*940*1460 MM			Oil tank: 140 L
Weight: 1130 KG			Noise level (@7m): 75 Dba
Engine Technical Parameter
Manufacturer: DCec			Model: 4B3.9-G2
Prime power: 24 KW			Start method: 24V DC Electric start
Max power: 30 kw			Cooling way: Water-cooling
Cylinder No.: 4-Cyl in-line			Fuel injection mode: Direct injection
Speed: 1500 RPM			Speed governor: Mechanical governor
Bore*stroke: 102*120 MM			Intake way: Turbocharged
Compression ratio: 17:1			Displacement: 3.9 L
Fuel consumption (100% load): 209 g/kw.h			Overload capacity: 110%
Lubrication oil capacity: 11 L			Oil trademark: 0# light oil
Alternator Technical Parameter
Manufacturer: MECC ALTE			Model: ECP28-2L/4
Power: 20 KW			Type: self-excitation, brush-less, 100% copper wire
Rated voltage: 380/220V			Protection class: IP23
Frequency and Speed: 50 HZ/1500 RPM			Insulation class: H
Power factor: COSΦ=0.8			Connection way: 3 phase 4 wire, "Y" type connection
Voltage regulator: AVR			Voltage regulation: ±0.5%

General Data Sheet



Packaging & Delivery

Package detailed	Pallet
Delivery detailed	5-20 working days after receiving deposit

Company Profile
YouKai power has obtained authorization certificate of CUMMINS, Volvo Engine and builts good relationship with MTU, SCANIA, DOOSAN. China Yuchai, Weichai, Shangchai and JiChai engine  generator sets are our conventional products. They are equipped with famous alternator brand  MECC ALTE,Stamford, Marathon, Leroysomer, Engga, which guarantees longer working time and stronger power ouput. We can offer power range from 12 kw to 2000 kw. Besides, YouKai power also manufacture small portable diesel generator, they use water-cooled engine, usually use for home, office, camp and so. This type we can supply 3 kw, 5 kw, 5.5kw, 7kw, 8kw, 10kw. We pay more attention to produce environment friendly products. All the products have passed CE, ISO revelant certificates. 



Service Assurance
1)Before-sale Service: We provide detailed product technical parameters for equipment choosing and system designing
2)Service quality assurance: Our sale staffs are all experience and professional, who can provide the most proper system design and optimized equipment for the customers. 
3)After sale maintenance service: We create files for end user and provide them follow-up service, regular return visit if necessary.

 

Product Description
1. Engine
Heavy duty diesel engine
Four stroke, water cooled
24V stater and charge alternator
Cooling radiator and fan
Maintenance free battery including ract and cable
Flexible fuel connection hoses and manual oil sump drain valve
Exhaust silencer
2. Alternator
Brushless, single bearing, flexible disc
Insulation class: H
Protection class: IP23
Self-exciting and Self-regulation
3. Soundproof Canopy
All canopy designed with modular principles
All metal canopy parts painted by electrostatic polyester power paint
Soundproof design ensure that the noise level be controlled in small scope
Convenient to lift and move
Easy to maintenance and operate
4. Fuel Tank
Base frame including position for forklift and crane
Integral fuel tank
Daily fuel tank continuously supply for 8-24 hours
Fuel tank easy to maintain and clean
Anti-vibration pads are flexed between engine and alternator.
5. Control Panel
Smartgen 6110, function including:High water temperature, Low oil pressure, Over and under speed,
Over current, Under/Over generator voltage, Start and stop failure, Low and high battery voltage,
Charge fail, Emergency stop.






Technical Parameter 
30kVA Diesel Generators Soundprood Type Powed by Cummins

Environmental conditions: Altitude: ≤1000 m  Ambient temperature: 40 ºC, Relative humidity: ≤60%
Max Power: 24KW/30KVA			Steady State Voltage Regulation Rate: ≤±0.5%
Prime Power: 20KW/25KVA			Voltage Fluctuation Rate: ≤±0.5%
Phase: ThreeÂ			Transient Voltage Regulation Rate: +20~-20%
Power Factor: COSΦ=0.8			Voltage Stable Time: ≤1S
Output Voltage: 380/220 V			Steady State Frequency Regulation Rate: ≤1%
Output Current: 43.2 A			Frequency Fluctuation Rate: ≤±0.5%
Rated Frequency: 50 HZ			Transient frequency regulation rate: +15~-10%
Rated Speed: 1500 RPM			Frequency Stable Time: ≤3S
Size(L×W×H): 2200*940*1460 MM			Oil tank: 140 L
Weight: 1130 KG			Noise level (@7m): 75 Dba
Engine Technical Parameter
Manufacturer: DCec			Model: 4B3.9-G2
Prime power: 24 KW			Start method: 24V DC Electric start
Max power: 30 kw			Cooling way: Water-cooling
Cylinder No.: 4-Cyl in-line			Fuel injection mode: Direct injection
Speed: 1500 RPM			Speed governor: Mechanical governor
Bore*stroke: 102*120 MM			Intake way: Turbocharged
Compression ratio: 17:1			Displacement: 3.9 L
Fuel consumption (100% load): 209 g/kw.h			Overload capacity: 110%
Lubrication oil capacity: 11 L			Oil trademark: 0# light oil
Alternator Technical Parameter
Manufacturer: MECC ALTE			Model: ECP28-2L/4
Power: 20 KW			Type: self-excitation, brush-less, 100% copper wire
Rated voltage: 380/220V			Protection class: IP23
Frequency and Speed: 50 HZ/1500 RPM			Insulation class: H
Power factor: COSΦ=0.8			Connection way: 3 phase 4 wire, "Y" type connection
Voltage regulator: AVR			Voltage regulation: ±0.5%

General Data Sheet



Packaging & Delivery

Package detailed	Pallet
Delivery detailed	5-20 working days after receiving deposit

Company Profile
YouKai power has obtained authorization certificate of CUMMINS, Volvo Engine and builts good relationship with MTU, SCANIA, DOOSAN. China Yuchai, Weichai, Shangchai and JiChai engine  generator sets are our conventional products. They are equipped with famous alternator brand  MECC ALTE,Stamford, Marathon, Leroysomer, Engga, which guarantees longer working time and stronger power ouput. We can offer power range from 12 kw to 2000 kw. Besides, YouKai power also manufacture small portable diesel generator, they use water-cooled engine, usually use for home, office, camp and so. This type we can supply 3 kw, 5 kw, 5.5kw, 7kw, 8kw, 10kw. We pay more attention to produce environment friendly products. All the products have passed CE, ISO revelant certificates. 



Service Assurance
1)Before-sale Service: We provide detailed product technical parameters for equipment choosing and system designing
2)Service quality assurance: Our sale staffs are all experience and professional, who can provide the most proper system design and optimized equipment for the customers. 
3)After sale maintenance service: We create files for end user and provide them follow-up service, regular return visit if necessary.

 

Compared with the castings, metal after forging processing can improve its organizational structure and mechanical properties. Casting organization after forging method of thermal deformation due to metal deformation and recrystallization, make original bulky dendrite and columnar grain to grain is fine and uniform axial recrystallization organization, make the ingot in the original segregation, porosity, porosity, slag compaction and welded, such as its organization become more closely, plasticity and mechanical properties of the metal.

The mechanical properties of castings is lower than forging mechanical properties with the same material. In addition, the metal forging process can guarantee the continuity of fibrous tissue, the forging of fibrous tissue and forging appearance consistent, metal flow is complete, can guarantee the parts with good mechanical properties and long service life with precision die forging, cold extrusion, extrusion temperature and other process of forging, is incomparable by casting

Forging is a metal pressure, through the shape of the plastic deformation shape requirements or suitable compression force. This kind of typical power by using a hammer or pressure. Forging process built fine granular structure, and improve the physical properties of metal. In parts of practical use, a proper design can make the grain flow in the direction of main stress. Casting is to use all kinds of casting method for metal forming objects, namely the good liquid metal smelting, casting, injection, inhaled or other casting method into the prepared mold, after cooling the shakeout, cleaning and post-processing, etc., of a certain shape, size and properties of objects.

There are many different kinds of forging processes available, however they can be grouped into three main classes:

Drawn out: length increases, cross-section decreases

Upset: length decreases, cross-section increases

Squeezed in closed compression dies: produces multidirectional flow

Common forging processes include: roll forging, swaging, cogging, open-die forging, impression-die forging, press forging, automatic hot forging and upsetting

Steel Forging Parts are very popular in forging process. We can supply big range of such steel  Forging Parts.

B. Main particulars

C. Construction

Construction by forging and machining

D Workmanship

The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces 

E. Certificates

- Material certificates

- Measuring reports

- Inspection protocol

- NDT reports

- Fixed certificate: ISO9001 certificate

Our service

Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.

Package and shipping

Export cartons, pallets, wooden cases, Polybags

container package and container transportation

Steel Forging Parts

Steel Forging Parts,Carbon Steel Forging,Precision Steel Forging Ring,Precision Forging Steel Shaft

Shinvast Industry Ltd , https://www.shinvastindustry.com