The engine is the strong heart of the wrecker, but the good or bad engine maintenance is directly related to the performance and life of the wrecker. In order to allow the "strong heart" of the vehicle to avoid all kinds of "pathological conditions," we must always take care of our heart-like engine and care for the engine. So, how to properly repair the wrecker engine? 1. When driving a wrecker, you must always ensure that the vehicle's cooling water, diesel oil, or gasoline is supplied continuously and in a timely manner. If these supplies are interrupted or are not timely, it will cause the wrecker's engine to fail when it starts up, or if its use of power decreases, it will burn badly, and so on. The engine will not work properly. If the vehicle's oil supply is insufficient and is interrupted, it will only result in poor lubrication of the engine, causing serious wear and burning of the internal components. If the supply of cooling water is insufficient, the engine temperature will increase, and the power will also drop, resulting in a gradual decrease in its service life. 2. Wreckers need to regularly check the fastening position of each component from time to time. Because the diesel engine is subjected to load unevenness and vibration shock during use, the nuts and screws of some parts of the wrecker are loosened. Moreover, when checking, it must be multi-faceted. The screws and nuts on each part must be inspected one by one, so as to avoid the unpredictable traffic accident caused by loosening. 3, before driving the wrecker, must be to allow the vehicle's various bearings and other parts of the location should be lubricated lubrication can be obtained after the normal start-up period can reach 40 to 50 degrees Celsius after the water temperature Only work can be done. It is not possible to keep the wrecker in a low-speed operation or an overloaded operation for a long time. When using a wrecker on weekdays, regular daily maintenance of the engine must be done well so that the vehicle's engine can be kept in optimal operating condition. 4. What is the function of the new wrecker? It should be understood that most drivers will understand the importance. Whether it is a wrecker that was mentioned or an engine that has undergone a major repair, it must be run in accordance with relevant regulations before the wrecker can be officially put into use.
Xinxiang SKF Machinery Co., Ltd. Dressing Grinding Wheel carrier, size can be made as customer required.
Application:
1. Compressor parts:Cylinder, Piston, Slide, Valve plate,Roller sleeve, upper and lower bearings, etc;
2. Hydraulic parts:Blade in pump blade, stator and rotor in steering pump,gear ring, etc;
3. Blade:Hard alloy blade, high speed steel blade, etc;
4. Others:Magnetic parts, artificial gemstone,etc;
Dressing Grinding Wheel Carrier Plate Dressing Stone Load Plate,Steel Dressing Wheel Carrier,Dressing Stone Carrier,Dressing Wheel Carrier Xinxiang SKF machinery Co., Ltd. , https://www.facegrindingmachine.com
