I believe many owners are no strangers to the term "neutral glide" and may have used it many times. Today Xiao Bian wants to say that there is a question of whether or not "neutral taxiing" is safe. Let's take a look at the following: Is it safe? When the car is hung to neutral, it will cut off the connection between the engine, transmission and the tire, thus losing the braking force. If an emergency situation requires timely braking, it is very dangerous. Therefore, there is a potential safety hazard in the air glide. Should be used with caution. Because the car is moving at high speeds, once an emergency situation is encountered, the most effective way is to quickly release the throttle and apply the brake pedal to emergency braking. If it is already replaced by neutral gear, even if the emergency brake is applied, the chassis brake system will not be linked to the engine and the engine brake will not function. This not only affects the effect of braking, especially those overloaded vehicles, but also causes the vehicle to lose its balance and glide right and left. If the driver is unable to control the car, it can easily cause an accident. And in the state of neutral coasting, the faster the brakes are used and the harder they are, the worse the braking force will be and the longer the taxiing distance will be. Another point worth noting is that when you step on the clutch while braking, the result is the same. Especially when going downhill, it is even more difficult to stop or depress the clutch brake, otherwise it is easy to lose control and cause disasters. Therefore, in order to protect the safety of the driver, some countries have made certain laws and regulations for neutral coasting. For example, China’s “Regulations on the Implementation of the Road Safety Law†stipulates that when a motorized vehicle is prohibited from extinguishing or coasting on a downhill slope, the laws of some states in the United States stipulate that as long as a car is driving on a road, it is not allowed to hang up in neutral. Through the above introduction, I believe that we have a certain understanding of whether or not the air-to-air glide is safe. We must not make mistakes because of some misunderstandings. Safe driving is the most important thing. Product introduction Scrap aluminium shredder, Aluminium alloy shredder, Waste aluminum shredding machine Shuangxing Mechanical Equipment Co.,Ltd , https://www.gyshuangxing.com
Scrap aluminum shredding machine is also known as aluminum alloy shredding machine, is a rolling knife shaft through the generation of shear force, will be a large number of scrap aluminum material shredding machine equipment to a certain size, with electrostatic and specific gravity separator will be completely separated from aluminum, suitable for a variety of aluminum materials crushing separation screening operations.
Principle of equipment
Aluminium scrap shredding machine (aluminium alloy shredding machine) with eddy current separator, screening machine, magnetic separator, which can effectively separate the aluminum, iron, paint will be all kinds of scrap aluminum alloy pieces, magnetic separation, screening, cleaning processing, non-metallic impurities removing metal impurities and waste, realize the separation of waste aluminum and recycling, sorting rate can reach 96-99%, maximum get pure aluminum into the next phase of smelting recovery, the aluminium scrap shredding machine effectively provide aluminium scrap recycling efficiency, reduce waste aluminum transportation cost, storage cost.
Characteristics of the equipment
1. The blade is made of cold die steel with good strength, high toughness and high cutting performance. The blade has four cutting edges and can be rotated 90° after wear for continued use.
2. Hydraulic forced feeding, stable and adjustable speed, large and even propulsion force
3. Hard tooth surface reducer, high transmission efficiency, strong bearing capacity and low noise.
4. Blade thickness: 20mm (customized according to customer needs)
5. Scrap aluminum shredder (aluminum alloy shredder) can be easily replaced after the tool damage or wear.
Equipment maintenance:
1. Fix the equipment on the foundation, start the air machine first, and check whether the parts are deformed or damaged during transportation.
2. During operation, the bearing and reducer shall be filled with quantitative lubricating oil. During normal operation, the material conveyor shall be cut out first, and the equipment shall be moved.
3. Before starting up each shift, check the lubrication of the bearing. At the end of each shift, clean the equipment carefully.
Applicable materials:
Is suitable for the aluminium scrap, such as aluminum, aluminum alloy, aluminum, aluminum plate, aluminum scrap, aluminum scrap, aluminum, aluminum wire, aluminum alloy, aluminum cans, aluminum scraps, aluminum casting, aluminum, aluminum tubes, scrap aluminium wire, aluminum mold, stamping aluminum, aluminum scrap, mechanical raw aluminum, aluminum foil, aluminum wire, PS version, aluminium scrap, scrap aluminum, cooked aluminum, aluminum slag, scrap aluminum ash, waste aluminum, waste aluminum, scrap aluminum mold, waste PS plate, such as aluminum scrap aluminium wire materials, smashing into a state of separation, the corresponding sorting equipment for aluminum separation, separation rate can reach 96-99%.