Inductive Electromagnetic Liquid Flow Meter for Water Irrigation Pump Station

Posted on

Model NO.: TFE Series
Measuring Media: Liquid
Measuring Principle: Electrical Principles
Measurement Object: Closed Pipeline
Certification: GB, CE
Ambient Temperature: Separate-Type: -10 ... +60 Degrees Celsius
Relevant Humidity: 5% ... 90%
Power Supply: Single Phase a.C 85 ... 265V, 45 ... 63Hz
Power Consumption: Equipped with Sensor, Less Than 20 W
Repeatability Error: 1% of Measuring Value
Output: Two-Way, All Isolated 0 ... 10mA / 4 ... 20mA
Damping Time: Option of Range in 0 ... 100s (90%)
Trademark: Tosilon
Transport Package: International Export Carton Packing, Water Proof
Specification: CE
Origin: Shaanxi
HS Code: 902920900
Electromagnetic Flow Meter | Tosilon Automation
Design and Manufacturing according to CE Standard
Inductive Electromagnetic Liquid Flow Meter for Water Irrigation Pump Station (Ex Approved)

Introduction
TFE Electromagnetic Flowmeter was developed based on principle of electromagnetic induction, i.e., when conductive liquid flows into measuring tube, the corresponding induction voltage signal, inspected from two electrodes installed on the tube, will be transmitted in transmitter and finally output digital signal.
TFE Electromagnetic Flowmeter is applied to measure the volumetric flow of conductive liquids and slurry in enclosed pipes, such as tap water, polluted water, mud, pulp, various acid/alkali/salt solutions, food slurry, etc. It has a wide range of applicant ambient, including oil interests, chemical industry, power plant, mining and metallurgic plant, water supply and sewerage works, light industry, food products factory, and so on.

Features
· Full stainless steel construction; 
· Laser Welding for Diaphragm
· 5-digit LCD Display;
· Static or Fluid Media Available;
· Temperature Compensation Available;
· HART PROTOCOL Available;
· Multiple type of Installation
· Diaphragm Safety Cover Available
Inductive Electromagnetic Liquid Flow Meter for Water Irrigation Pump Station
Outline Structure
Inductive Electromagnetic Liquid Flow Meter for Water Irrigation Pump Station


Technical Specification
Normal Operating Condition
Ambient Temperature
Separate-type -10 ... +60 oC
Relevant Humidity
5% ... 90%
Power Supply
single phase A.C 85 ... 265V, 45 ... 63Hz
Power Consumption
equipped with sensor, less than 20 W

Reference Performance for test
Ambient Temperature
20 oC ± 2 oC
Relevant Humidity
45% ... 85%
Power Supply
220 ± 2%
Frequency
50 Hz ± 5%
Content of Harmonic Wave
5%
Preheating Time
30 min

Repeatability Error
± 1% of measuring value

Current out
a. Current Output Signal: two-way, all isolated 0 ... 10mA / 4 ... 20mA
b. Load Resistance: 0 ... 10 mA, 0 ... 1.5k Ω; 4 ... 20mA, 0 ... 750Ω
c. Basic Error: based on basic error above mentioned, ± 10 μA

Frequency
Frequency output: forward and reversing flow output, the upper limit of output frequency can be set in the range of 1 ... 5000 Hz. The collector of transistor with optoelectronic isolator: open circuit two-way output. The external supply should no more than 35 V. In conducting state, the maximum current of collector should be 250mA.

Pulse Output
Pulse Output
forward/reversing flow output, the output upper limit can reach 5000 cp/s.
Pulse equivalence:
0.0001 ... 1.0 m3/cp. Pulse is automatically set 20ms or square wave.
The collector of transistor with optoelectronic isolator
open circuit two-way output. The external supply should no more than 35 V. In conducting state, the maximum current of collector should be 250mA.

Indication Output of Flow Direction
This flowmeter can measure flow of forward/reversing fluid and judge the flowing direction. It specifies that it will output +10V high level in forward direction while 0V low level in reversing direction.

Alarm Output
The collector of transistor with optoelectronic isolator: open circuit alarm output. The external supply should no more than 35 V. In conducting state, the maximum current of collector should be 250mA. Alarm situations: empty pipe, exciting wire-break, flow over limit.

Serial Telecommunication
Options of RS 232 and RS 485 with lighting-resistant function;

Damping Time
Option of range in 0 ... 100s (90%)

For more information, please contact Tosilon
Your Global Partner for Automation
www.tosilon.comInductive Electromagnetic Liquid Flow Meter for Water Irrigation Pump Station
DN (mm) Range of flow range (m/s) Accuracy Class 1.0 Accuracy Class 0.5
15~50 0.1~1.0 1% of Full Range 0.5 % of Full Range
0.5~10 1% of Indicating Value 0.5 % of Indicating Value
65~1000 0.1~1.0 0.5~10 1% of Indicating Value 0.5 % of Indicating Value

Plate Heat Exchanger Gaskets & Plates for APV Products

LIAN JIU Company is a stocking distributor of Plate Heat Exchanger Gaskets, Plate And Frame Heat Exchangers or for Plates for Plate and Frame Heat Exchangers. We also engineer, thermal rate, expand, clean, and sell plate and frame heat exchangers. We have been stocking and selling plate heat exchanger gaskets and heat exchangers for nearly 15 years.
Contact us for any aspect related to gaskets or plate and frame heat exchangers, as well as modifications or new equipment.

APV Gaskets

Apv Gasket,Apv Heat Exchanger Gaskets,Gasket For Apv,Apv Plate Heat Exchanger Gasket

Liaoning LotusNine International Trade co.,ltd , https://www.lj-heatexchangers.com