Ningbo DOKEE Medical Technology Co., Ltd. , https://www.dokeemedical.com
Safety net production enterprises apply for production license which necessary safety net testing equipment?
Safety nets are generally classified into flat nets, vertical nets, and dense-type safety nets. Safety net manufacturers must obtain production licenses for production safety nets, and must use safety nets to detect equipment when applying for production licenses. Different types of network, the need for safety net detection equipment is not the same, the following brief description:
Pingwang, Lien network production companies need the following safety net detection equipment:
I. ZW-732 Safety Net Impact Tester
Main Specifications:
1, electric lifting, release impact, easy to operate and reliable.
2, with a protective net: a height of 1 meter.
3, with a large thickness of rubber cushion, can effectively reduce the damage of the impact, or the use of sand pit buffer way, effectively reduce the damage without impact. (optional)
4. The impact rack is equipped with safety protection devices to ensure the safety of operators.
5, impact ball: diameter 500mm, mass 100kg;
Or cylindrical sandbags: diameter 550mm, height 900mm, mass 120kg.
6, the impact height can be adjusted: the highest distance test surface 7 meters. The total height of the impact frame is 11 meters.
7, style 3 meters away from the ground
8, in line with the standard GB5725-2009 "safety net"
Second, ZW-738 safety net tensile testing machine
Technical indicators:
1, models: two arms (LCD display)
2, the maximum test force: 50KN
3, measuring range: 2% - 100% of the maximum test force
4, accuracy level: Level 1
5, test force accuracy: better than ± 1% of the indication
6. Deformation display error: ≤±(50+0.15L)
7, test force: The minimum resolution 0.01N
8, displacement measurement: Resolution is 0.01mm
9, force accuracy: better than ± 1%
10, speed range: 1mm/min~~200 mm/min
11, test stroke: 600mm (can be customized according to customer needs)
12, stretching space: 600mm (can be customized according to customer needs)
13, compression space: 600mm (can be customized according to customer needs)
14, test protection function: overload protection
15, safety protection device: limit switch
16, in line with the standard GB5725-2009 "safety net"
Third, ZF-621 safety net flame tester (applicable to flame retardant)
1, the burner motor power consumption: 10W.
2, igniter timing: 0 to 99.99 seconds arbitrary settings (standard use of 12 seconds).
3, continue burning time and flame retardant time timer: 0 ~ 99.99 seconds, accuracy: ± 0.01 seconds.
4, flame height measurement device: Ruler height 40mm.
5, the use of gas: propane or butane or liquefied petroleum gas.
6, in line with the standard GB5725-2009 "safety net"
The above are the testing equipment that Ping Net and Lien network must apply for when applying for a production license. The enterprises that produce dense-security nets, in addition to the above three types of testing equipment, also need to:
Fourth, ZW-732 safety net penetration test machine
Technical indicators:
1. Penetration: stainless steel (or 45#) round bar with diameter 50mm and mass 5kg
2, through the test rack and the horizontal plane angle: 30 °
3, 1 meter high safety net is safe and reliable.
4, penetration test height: distance is 1 meter through the center of the net
If safety net manufacturers want to check the performance of the production safety net, according to national standards, ZW-736 safety net ultraviolet pretreatment kit and ZW-737 safety net salt spray test kit will also be used. For details, please pay attention to our website.
This article is an article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint it, be sure to add the source of the description. Reproduce the misappropriation without permission.