Many people think that as long as they don’t drive with a big foot, they can save fuel. Only those who are slow to open will be on the road. Because no matter how big foot throttle you do, at least it is doing useful work for advancement. When you brake, it will completely consume the kinetic energy that you accelerated before. Because no matter how big foot throttle you do, at least it is doing useful work for advancement. When you brake, it will completely consume the kinetic energy that you accelerated before. Here are the most fuel-efficient driving methods. What is predictable driving? For example, if you are driving along a long road in a city expressway, are you close to the car in front of you and you are looking at the front of the car and it is braking you to follow the brakes? The predictable driving method is this, for example. : Pull the car away when driving, so that the eyes can fall on the car in front of the dragon – as long as the brake light on the front of the car is bright, they consciously release the throttle, so that the front of the car dragon Then when a brake was applied, the speed had already been lowered and it was no longer necessary to brake more. The advantages of predictable driving Without sudden braking, there is no danger of rear-end collision. To continue, if the frontmost car is in a hurry, it indicates that there is a big situation. If conditions allow, you can choose to change lanes in advance so that you can avoid the danger and speed loss caused by silly braking. These are all mentioned in "predictability driving". For example, when running heavy rain or high speed national roads, when you encounter a continuous turn, do not choose the leftmost lane when turning left when you can, and do not select the rightmost lane when turning right. The first reason is that the line of sight in the rain and fog is not good enough for sighting and it is not easy to see the sudden situation. It is more important that usually the slope of the expressway will be designed with a certain angle of inclination. The drainage is all inwards. Therefore, there is a good chance of water incursions when the rain is heavy, which poses a great threat to traffic safety. Learned what Xiao Bian called "predictable driving", maybe someday when you can do high-speed run, except to enter the toll booth, you don't need to step on the brakes. Stainless steel pipe or thin-walled parts, the cutting is light, the vibration is small, the chips are brittle, and the workpiece is not deformed. High-speed milling with carbide milling of stainless steel with indexable which have achieved good results. When cnc milling stainless steel, the cutting edge must be sharp and bear the impact, and the chip pocket should be large. Quality Cnc Machining Parts,Custom Metal Parts,Custom Cnc Steel,Machining Parts Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com