Dump trucks need to pay attention to the operation

Some owners did not correctly use the vehicle's operating specifications after they bought the dump truck. After that, the vehicle would have various breakdowns, causing the dump truck to fail. Work was done and caused a loss. Therefore, after the owners have taken the vehicle back, they must be careful to watch the manual for the use of the vehicle. When the dump truck is used, should it pay attention to those operations?

1. Dump trucks must not flush water into the hydraulic tank when cleaning. Normally, it is necessary to check the height of the hydraulic oil surface at regular intervals. When the hydraulic oil is insufficient, it must be filled immediately. There must be no oil leakage in all the oil line joints.

2. Regardless of whether the power take-off device or the gear is disengaged, the clutch pedal should be depressed. If the multi-way reversing valve and the power take-off device are under working conditions, then the garbage truck cannot be driven. State.

3. Dump-type garbage trucks cannot put the construction waste of a building into the carriage. This will cause damage to the machine.

4. The pressure regulating device of the dump truck's hydraulic system is a pressure regulating bolt for the multi-way reversing valve. The bolt is after professional calibration and is locked. When it is used, it is You can't arbitrarily mobilize yourself. And users cannot adjust the hydraulic pressure as they like.

5. When the vehicle is inspected and repaired, care must be taken to avoid bumps and scratches, deformations, and damages of parts. When assembling components, care should be taken to clean them.

6. The one-way throttle valve of the dump truck is used to control the speed of the hydraulic cylinder. After the device is set and locked, it cannot be arbitrarily transferred.

7. When the hydraulic system of the vehicle has an abnormality during operation, it is necessary to immediately stop the operation. After the failure is analyzed and eliminated, the normal operation can be performed. The forced pressure operation should not be performed.

Face Mask Machine

Face mask machine are classified as several types:

1. Semi-automatic and fully automatic type of sewing machines;

2. N95 type, cup type and surgical type of face mask making machines;

3. Retrofitted, new designed or specially designed face mask machine.

With different solutions in applying mask machines to produce mask to fight COVID19, we are able to meet what customers need.

face-mask-machine

Not only full set of face mask machine we can provide but also machine parts or components. More and more machines will be listed in our catalogue for cooperating our customers to produce face mask better and faster.



face mask packing machine, 3 ply face mask machine maker, face mask making machine n95, face mask machine earloop, face mask machine fully automatic

DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , https://www.ch-sewing.com