How much does it cost to install monitoring?

Posted on

Monitoring the quotation has always been a question frequently asked by security friends, because after all, each project is different, and the way of quoting is different. Here, Security King will talk to you about monitoring the quotation and recommend this article to everyone.
Monitoring installations Our general main charges are two:
The first is to calculate by point, this is a project for small monitoring.
The second type for large-scale monitoring projects, according to the percentage of equipment, generally we take 15%-20%, the larger the project, the smaller the proportion.
A small-scale construction requires a point between 150 and 300. If the standard construction process, the main material such as cable is not lower than 300 points, some constructions are difficult to spread to more than 500 yuan. higher.
The current national standard for camera installation is between 70 and 80, the bracket is installed 30~40, the manual lens also includes the debugging of the lens, and the overall debugging of the split debugging can be ignored. Cable laying is 250~300 yuan/100 meters depending on the type of wire diameter. Too high (5 meters or more) will also increase the labor cost by 3 to 4%, and the upper level will increase the fee.
Then talk about the choice of monitoring equipment
1. After determining the installation location, calculate the number of cameras installed. The clarity of the camera and the need for night vision are a way to differentiate prices. The resolution requirement is not high, and the night vision function is not needed. According to the quality, the camera price needs 200-300 yuan, and the camera with higher requirements may need 300-600 yuan.
2. Select to install a hard disk recorder to store and control the information collected by the camera. It is generally not recommended to install the monitoring card directly with the computer. Because the camera needs to be used for 24 hours, the computer must be turned on 24 hours, which is not good for computer cooling and virus prevention and control. It is recommended to install DVRs. There are many brands of hard drives available, ranging from 100 to 700 yuan. Dahua, Hikvision, etc. can be selected according to their needs. Remember to distinguish between on-site monitoring and network monitoring, so you should decide whether to choose a hard disk recorder with network function.
3, the price range of the display is wider, there are many TV computer manufacturers, the quality, size and clarity of the display are all diversified, which are determined according to personal preferences and needs. The general display can be fixed at 3,000 yuan, and the multi-screen display of several tens of inches may vary by several thousand yuan depending on the brand!
4. The choice of the line is also a factor affecting the price. You can use direct routing or use wireless routing. Of course, wireless is more expensive, and the transmitted signal is susceptible to physical factors. It is recommended to use direct wiring. Determine the cable length based on actual usage. Brand and quality also determine the price, generally 200-400 or so can be done.
5. Finally, if you want to install it yourself or need to ask the worker to install it, this is another cost. The general installation fee needs a point of about 200-350.

U Channel Roll Forming Machine

 

Working principle:

Steel strip is made into U channel keel by machine through cold-bend forming technology.

 

Usage:

U Channel keel produced by roll forming machine are widely used in construction, transportation and other industries. It is mainly used for roofing and wall of buildings, such as steel structures, airports, storehouses,etc.

 

Component:

1.Decoiler 

2.Roll Forming System     

3.Punching system           

4.Cutting Device           

5.Hydraulic Station        

6.PLC control system       

 

Working Flow:

Loading coil – decoiling – guide feeding – main roll forming – hydrarlic cutting – finished products

 Working Flow

 

Technique parameters:

Processing material: aluzinc/galvanized steel/colored steel coil

Material thickness: 0.3-2mm

Main motor power:4kw(can change as request)

Pump power: 4kw

Shaft diameter: 75mm

Forming steps: 15steps and more

Roller material: high grade 45# steel, hard Chromium plating

Main frame: steel tube frame

Medium plate thickness: 16mm

Speed:8-12m/min

Material of the cutting blade:Cr12

Control system: PLC computer control

Power supply: 380V, 3 Phase, 60Hz (can change as customers request)

 

Our U Channel Roll Forming Machine can greatly simplifie the production process and improve production efficiency. Customized profile keel roll forming machine can be produced.

 

Welcome visit our Factory!

 

U Channel Roll Forming Machine

U Channel Roll Forming Machine,Light Steel U Channel Roll Forming Machine,U Shape Channel Purlin Roll Forming Machine

CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , https://www.hebeimachine.com